Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
We speak: We speak
416 663 4777
24/7 Emergency Service

Give us a call today: 416 663 4777 for a free upfront estimate!

Problems With Low Water Pressure

Increase Water Pressure

Water pressure is a measure of strength of water flowing through any pipe. The greater the volume of flowing water, the greater will be the pressure. Maintaining a perfect pressure is very necessary. A high pressure can lead to bursting of pipes. On the other hand, low water pressure can be frustrating too. It can cause problems in flushing the toilet, taking showers, washing clothes, and cleaning dishes. There can be various reasons for low water pressure. Following are a few of them along with their solutions:

A galvanized pipe can be a major cause of low pressure. It can lead to several problems like slow drains and rusty water. The chances of this problem get higher if your house is more than 40 years old. In such a case, it is better to call a professional plumbing contractor to replace pipes that have been galvanized.


In case you are facing low pressure problems, check the aerator screen and water storage devices for any possible clogging. Test the flow of water after removing heads of the faucets. If that solves it, you just need to replace the clogged pieces. However, this is generally not the case. A thorough examination of the pipes by an expert is necessary to ensure proper functioning.

Hard Water

If your locality has a problem of hard water, sediments can get accumulated in water heaters. This is a general problem in many areas in Toronto. It hinders the flow of water which then causes low pressure. Draining out water from the heater after every couple of months is a good practice. Doing so ensures that there is no deposit of sediments.

As is evident, there can be many reasons for low water pressure. This is why you need to hire a professional to assess the situation. A licensed plumber or contractor can easily point out where exactly does the problem lie. Taking services from a reliable plumber can save you hundreds of dollars which you otherwise might spend on hit and trial methods.


Using supply lines of small diameter can also be the reason for low pressure. For example, a half-inch pipe cannot transfer water with high pressure. This can be upgraded to a three-quarter or even a full one inch line. This immediately results in an increase in water pressure. The fall in pressure as we go from the main line towards the branches is also necessary. It ensures that sinks and other appliances do not get affected by high pressure. Otherwise, they can get damaged. 

These rules are the right steps, but still, professional help is needed every now and then. Ensure that you hire only renowned and professional contractors like Dr. Pipe Drain and Plumbing  for the job.

Give us a call today: 416 663 4777 for a free upfront estimate!